One-Handed Operation: Hold the tape dispenser with one hand.
Eject Tape: Press the handle to automatically eject approximately 30mm of adhesive tape.
Align the Roller: Position the front roller over the target surface (best on flat or smooth areas for better adhesion).
Pull the Tape: Pull the tape out to the desired length.
Release to Cut: Release the handle, and the tape will be cut automatically.
Precautions:
Short Tape Length: If you press and release the handle immediately, only 30–40mm of tape will be ejected. For longer lengths, press the handle, pull out the required tape, and then release.
Tape Width Compatibility: The dispenser works with 12mm and 19mm wide adhesive tapes, with a thickness between 0.05mm–0.07mm.
No Cutting Residue: A 5mm portion of tape is intentionally left uncut to prevent the tape from falling out.
Handle Pressing: For best results, press the handle fully (not halfway) and release instantly to avoid jams.
Clear Opening: Ensure the front opening is not blocked after each use to prevent tape jams.
Tape Jams: If the tape is jammed, open the top cover, remove the jammed tape, clean off any residue, and reload the tape to restore normal operation.
These instructions should help ensure smooth and efficient use of your tape dispenser!
